Tuesday 31 March 2020

Things to keep in mind for Electric Trolley Hoist


Electric Trolley Hoist are assembled  with electric motors, Gearboxes, Wire Rope drum with rope guides, electric panel board  and large wire rope connected to a hook for lifting. Electric Trolley Hoist are used to carry heavy objects weighing between 500 Kgs and 20 tons in different conditions like severe heat while welding, over the boilers and furnaces or in acidic atmosphere. Before installing and using an Electric Trolley Hoist, you must get the requirement clear and place an order to Electric Chain Hoist Suppliers accordingly. You may also require instruction guide or someone to explain its use, here we have few major thing you should keep in mind 

- Lubrication check : Make sure the Geared Trolley Hoist are filled up to the mark recommended oil in hoist and the end carriages 
-Test buttons: Test your control buttons before your Electric Chain Hoist  is carrying a load. Test your emergency stop button by pressing it, and making sure the wire rope hoist stops in time. 
-Tangling of wire rope: Lower the rope all the way to make sure your rope is not tangled by lowering or lifting load. If the wire  rope is tangled, make sure to untangle it.
-Check Cross Motion: Press the second set of arrows on your control switch to move the crane to the right or to the left. Check the cross travel limit switches working by taking the hoist to the extreme of the monorail or the Crane Bridge.
-Check Crane Motion: Press the third set of arrows on your control switch to move the crane horizontally. Check the cross travel limit switches working by taking the crane to the extreme .
-Trial run with the load: Press the down arrow in the first set of arrows on your control switch to lower the crane. When your hook has been attached to your load, you can press the up arrow to lift the load. Use the second and third sets of arrows to direct the load to its destination.
-Do not try other’s luck: Do not operate the electric wire rope hoist if people are under it. Stop the hoist and wait until the area is clear.
These were few important factors one needs to figure out from Electric Chain Hoist Suppliers to get suitable Electric Trolley Hoist for best output and avoid any kind of hindrance in work. Balbir Singh and sons are one the most trusted  Electric Chain Hoist Suppliers and other lifting equipment with an experience of more than 60 years in the industry and are on no. 1 position for 2 consecutive years. Check there range of products here  http://balbirsinghandsons.com/

No comments:

Post a Comment