Safety tips for chain slings

 

Everyone looks for strength and durability while performing lifting operations. Chain slings for lifting are meant to provide the same and are used in the applications where extra strength and durability are required.

Chain slings for lifting are more durable and temperature resistant as compared to the other slings available.

Below given are some Do’s and Don’ts of the chain slings

Do’s

• Properly check the slings as well as the equipment. They should be free of damage. Use the slings and the most suitable slinging method for the load.
•  Protect the slings from sharp edges and corners.
• Fasten the sling securely to the load & appliance and make sure that the hooks are facing outwards.
• Ensure the load is balanced and will not tilt or fall.
• Keep fingers, toes etc clear while landing loads.
• Ensure that the load is free to be lifted.
• Make a trial lift before properly going for it.

Don’ts

• Don’t use damaged, defective or worn out slings.
• Don’t twist, knot or tie slings.
• Hammer slings into position.
• Don’t ever overload slings by putting extra weight than mentioned.
• Don’t drag slings over floors and not even attempt to pull trapped slings from under loads.

Safety instructions

• Store and handle chain slings correctly. 
• Inspect chain slings and accessories before use and before placing into storage.
• Follow safe slinging practices.
• Apply the correct mode factor for the slinging arrangement.
• Always use within posted working load limit.
• Distribute loads evenly. An unequal load on one leg can create a dangerous situation and damage the sling.
• Rapid or sudden stops and lifts should be avoided.
• Do not allow a chain length to be twisted or tied into a knot
• Protect sharp edges and corners accordingly with padding or protectors to keep chain from coming in contact.
• Clean chains prior to inspection; oil and dirt can hide chain damage.

 

Advantages of having a chain pulley block

 

Chain pulley block consists of two wheels to which the chain is connected which in turn moves with the wheels and due to this the load or item attached to it via hook is lifted.

Having a chain pulley block is very beneficial for the industries.

While choosing a chain pulley block you have to be very careful. With the help of the chain pulley block, lifting and lowering of exceptionally heavy loads through chains is performed.

1. Select the Right Capacity (Knowledge of the Capacity is Power)
2. Selecting the Suitable Mounting (Hook Mounted or Trolley Mounted)
3. Load Chain made up of Alloy Steel.
4. Chain length should be selected correctly. 
5. Spare parts that can be altered. 
6. Check the warranty

There are a lot of reasons for having a chain pulley block. Without further ado, let’s have a look at some

·        High Performance

Using a chain pulley block gives a brilliant performance. Manufacturers of chain pulley block in India know about it and hence provide their customers with the guarantee on the product.

·        Very little maintenance

One of the major benefits of it is that it comes with zero or very little maintenance. The maintenance gets reduced to zero if you purchase it from a well know and leading BSS Chain Pulley Block manufacturer. Hence there is no extra expenditure on its maintenance if chosen wisely.

·        Light weight and easy to carry

Owing to their lightweight, these BSS Chain Pulley Blocks can be operated very easily. The other advantage due to its lightweight is, it is very easy to carry and can be moved from one place to another without any difficulty.

·        Compact size

The BSS Chain Pulley Block is very beautiful and has a compact size. Being compact, it is chosen by many and also adds up to a lot of benefits.

If you choose a leading chain pulley block supplier, all of the above given benefits can be achieved making your work relaxed and less hectic.